So here's how you do it.
Note--I used a heavy duty denim needle and denim thread. You may be able to get by with a heavier than normal needle and regular thread depending on your machine. You want to use a blue thread that won't show.
First step is to pin your original jean hem to where you want the jeans to end. (Note: The end will be the original seam--not the bottom of the fold..so measure and pin correctly!)
Next: Sew as close to the original jean hem as possible. (Directly under the hem)
Now, carefully cut off the jeans under where you just sewed. Leave about a 1/4 inch under where you sewed.
Now....flip the seam and flatten with your finger so that the extra 1/4 inch you left is above the seam. Now sew above your first seam very closely. This will make your original seam lay flat!
No comments:
Post a Comment